Olathe, KS
Farm Equipment Transport

In Olathe, KS, a load is generally considered oversized or overweight if it exceeds the legal limits for Kansas:

• Width: 8'6"
• Height: 14'
• Length: 65 feet overall combination
• Weight: 80,000 lbs gross vehicle weight

Any farm equipment load exceeding these limits may require an oversize or overweight permit in Kansas. State, local, bridge, axle, and route-specific restrictions may apply. Contact us for route-specific requirements.

• Permits are required for farm equipment transport exceeding legal size or weight limits in Kansas
• Permit duration and routing depend on permit type, load dimensions, weight, and issuing agency approval
• Route-specific approval may be required for loads moving through Olathe's Midwest farm, auction, dealer, and heavy equipment corridors
• Travel restrictions may apply during peak traffic, construction, weather events, or route limitations on the I-35, I-435, K-7, and US-169 corridors
• Local Olathe city and Johnson County approvals may be required in addition to Kansas state permits when using city or county roads

Escort vehicles may be required for farm equipment transport in Olathe, KS depending on width, height, length, overhang, route, and permit conditions:

• Escort vehicles may be required when farm equipment transport exceeds Kansas legal size, weight, or permit routing limits
• Overwidth, overheight, overlength, and rear-overhang conditions are reviewed during the oversize/overweight permit process
• One or more pilot cars may be assigned based on the approved route, roadway type, traffic conditions, bridges, and work zones
• Height-pole escorts, police escorts, or utility coordination may be required for high loads or complex urban routes
• Local city, county, or bridge authority requirements may apply in addition to state permit conditions

• Permitted farm equipment hauling in Olathe, KS is controlled by state oversize rules, local routing conditions, and the movement instructions printed on the permit.
• State highway movement in Kansas follows permit-controlled hours; Kansas permitted movement is controlled by the permit and approved route, with daylight movement commonly used for many oversize loads.
• Holiday and weekend movement should be checked before dispatch because weekend and holiday restrictions may apply depending on size, weight, and route.
• Loads moving through Olathe should be reviewed for traffic curfews or routing limits on I-35, US-169, and K-7.
• Olathe and Johnson County may require additional coordination when the route leaves the approved state highway system.

• "Oversize Load" signs should match the active permit conditions for oversize agricultural machinery in Olathe, KS
• Wide or overhanging farm machinery should be flagged according to Kansas permit conditions before entering Olathe routes
• Amber lighting should be checked before departure so escort vehicles and nearby motorists can identify the permitted load
• Weight distribution must be reviewed before hauling so the load remains stable and compliant throughout the approved route
• Urban delivery points, ramps, and restricted roads around Olathe may require extra safety planning before the load is released

• Oversize farm equipment moving through Olathe, KS needs a route that accounts for bridge restrictions, lane width, and safe turning space.
• Ramp geometry, shoulder width, and intersection space should be reviewed before moving large equipment on I-35, US-169, and K-10.
• Weather, resurfacing projects, and emergency closures may require alternate routing before the load is released.
• Loads should stay on the permitted route unless the state or local authority approves a revised path.