Hammond, IN
Farm Equipment Transport

In Hammond, IN, a load is considered oversized if it exceeds:

• Width: 8'6"
• Height: 13'6"
• Length: 53 feet semitrailer / 65 feet overall combination
• Weight: 80,000 lbs gross vehicle weight

Any load exceeding these limits requires an oversize or overweight permit.

• Permits are required for farm equipment transport exceeding legal size or weight limits in Indiana
• Permit duration and routing depend on permit type, load dimensions, weight, and issuing agency approval
• Route-specific approval may be required for loads moving through Hammond's dealer, industrial, regional freight, and Midwest equipment shipping corridors
• Travel restrictions may apply during peak traffic, weather events, or route limitations on the I-90, I-80 / I-94, US-41, SR-152, and I-65 corridors
• Local Hammond city and applicable Lake County approvals may be required in addition to Indiana state permits when using city or county roads

Escort vehicles may be required based on load dimensions:

• Escort vehicles may be required when farm equipment transport exceeds Indiana legal size, weight, or permit routing limits
• Overwidth, overheight, overlength, and rear-overhang conditions are reviewed during the oversize/overweight permit process
• One or more pilot cars may be assigned based on the approved route, roadway type, traffic conditions, bridges, and work zones
• Height-pole escorts, police escorts, or utility coordination may be required for high loads or complex northwest Indiana freight routes
• Local city, county, or bridge authority requirements may apply in addition to state permit conditions

• Oversize farm equipment transport in Hammond, IN can only move during the times authorized by the permit and any route-specific restrictions.
• For moves using Indiana state routes, permitted movement is controlled by permit conditions and approved routing, with daylight travel commonly used for many oversize loads.
• Weekend, holiday, urban-area, and seasonal route restrictions may apply depending on dimensions and routing.
• Oversize farm equipment transport may need to avoid the busiest travel periods on I-90, I-80 / I-94, US-41, SR-152, and I-65.
• Local road access, posted restrictions, and delivery timing in Lake County may affect final routing after the state permit is issued.

• "Oversize Load" signs must be used when required by the state permit for farm equipment hauling in Hammond, IN
• Visible safety flags are important when moving wide machinery through northwest Indiana freight corridors, industrial access roads, and rural delivery routes
• Lighting visibility should be confirmed before transport begins, especially on I-90, I-80 / I-94, US-41, SR-152, and I-65
• Equipment must be secured to meet federal cargo securement requirements and any additional conditions listed on the oversize permit
• Local access restrictions can affect how oversize farm equipment is marked, flagged, and routed through Hammond and Lake County

• Agricultural equipment shipping in Hammond, IN may require advance review of industrial corridors, interstate freight traffic, and regional delivery routes before dispatch.
• Equipment moving through northwest Indiana may need planning around heavy truck traffic, dealer pickup areas, storage yards, and Midwest freight connections.
• Oversize machinery may require alternate routing, staging coordination, or permit-specific route review before travel begins.
• City, county, and state routing requirements may apply when moving farm equipment through Lake County corridors such as I-90, I-80 / I-94, US-41, and I-65.