Madera, CA
Farm Equipment Transport

Standard California highway limits generally allow loads up to 8 feet 6 inches wide, 14 feet high, and 80,000 pounds gross vehicle weight. Semitrailers are generally limited to 48 feet, with qualifying 53-foot semitrailers allowed under applicable axle-position requirements. Larger farm equipment may require permits and approved routing.

Farm equipment exceeding California legal size or weight limits may require a Caltrans oversize or overweight transportation permit before moving through Madera. Permit planning should use accurate loaded dimensions, axle weights, trailer configuration, origin, destination, and route information so irrigation infrastructure, agricultural roads, bridge limits, and seasonal traffic can be reviewed.

Farm equipment moving through Madera may require California-certified pilot cars depending on the permitted dimensions and route classification. Width, height, length, irrigation crossings, agricultural traffic, bridge approaches, and route-specific permit conditions can influence escort placement.

Farm equipment moving through Madera must follow the travel periods authorized on the California transportation permit. Harvest traffic, agricultural activity, construction, weekends, fog, heat, and reduced visibility can influence when the shipment is permitted to move.

Farm equipment moving through Madera should be prepared for Central Valley heat, irrigation infrastructure, harvest traffic, field access, and long agricultural roads. The trailer, securement points, chains, binders, ramps, winches, brakes, tires, lights, flags, and warning equipment should be inspected before pickup.

Farm equipment routes through Madera should account for CA-99 traffic, irrigation canals, agricultural activity, harvest schedules, and narrow field roads. CA-145, CA-41, Avenue 12, and Avenue 16 provide important regional access, while farm entrances and irrigation crossings should be reviewed for width, clearance, and trailer turning room.