Conway, AR
Farm Equipment Transport

Standard Arkansas highway limits generally allow vehicles and loads up to 8 feet 6 inches wide, with legal height, length, axle, and gross-weight limits depending on roadway and vehicle configuration. Interstate gross vehicle weight is generally limited to 80,000 pounds, and oversized farm equipment may require a special permit.

Farm equipment exceeding Arkansas legal size or weight limits may require an oversize or overweight permit before moving through Conway. Permit planning should include the loaded dimensions, gross and axle weights, trailer configuration, origin, destination, and proposed route so I-40 traffic, bridge limits, heavy rain, construction, and rural access conditions can be reviewed.

Oversized agricultural equipment moving through Conway may require escort vehicles depending on the permitted dimensions and Arkansas travel conditions. Width, height, length, bridge approaches, I-40 traffic, rural road visibility, and route-specific permit requirements can determine the escort plan.

Oversized agricultural equipment moving through Conway must follow the travel conditions listed on the Arkansas oversize or overweight permit. I-40 traffic, severe weather, construction, holiday restrictions, bridge conditions, and reduced visibility can affect the approved travel window.

Farm equipment moving through Conway should be secured for heavy rain, rural roads, soft shoulders, and working agricultural properties. The trailer, chains, binders, ramps, winches, brakes, tires, lights, flags, and warning devices should be inspected before departure, with ground conditions checked at the pickup and delivery sites.

Farm equipment routes through Conway should be planned around I-40 traffic, bridge restrictions, heavy rain, construction, and rural road conditions. US-64, US-65, AR-25, and AR-60 provide regional access, while farm entrances and final delivery roads should be checked for soft shoulders, gate width, and trailer maneuvering room.