Wichita Falls, TX
Farm Equipment Transport

In Wichita Falls, TX, a load is considered oversized if it exceeds:

• Width: 8'6"
• Height: 14'
• Length: 45 feet single vehicle / 59 feet semitrailer / 65 feet truck-tractor combination
• Weight: 80,000 lbs gross vehicle weight

Any load exceeding these limits requires an oversize or overweight permit.

• Permits are required for farm equipment transport exceeding legal size or weight limits in Texas
• Permit duration and routing depend on permit type, load dimensions, weight, and issuing agency approval
• Route-specific approval may be required for loads moving through Wichita Falls's North Texas farm, ranch, dealer, and equipment shipping corridors
• Travel restrictions may apply during peak traffic, construction, weather events, or route limitations on the I-44, US-82, US-277, US-281, US-287, and TX-240 Loop corridors
• Local Wichita Falls city and applicable Wichita County approvals may be required in addition to Texas state permits when using city or county roads

Escort vehicles may be required based on load dimensions:

• Escort vehicles may be required when farm equipment transport exceeds Texas legal size, weight, or permit routing limits
• Overwidth, overheight, overlength, and rear-overhang conditions are reviewed during the oversize/overweight permit process
• One or more pilot cars may be assigned based on the approved route, roadway type, traffic conditions, bridges, and work zones
• Height-pole escorts, police escorts, or utility coordination may be required for high loads or complex routes through Wichita Falls' farm, dealer, rural access, and equipment shipping corridors
• Local Wichita Falls city and applicable Wichita County approvals may apply in addition to Texas state permit conditions when using city or county roads, including routes near I-44, US-82, US-277, US-281, US-287, and TX-240 Loop

• Oversize farm equipment transport in Wichita Falls, TX can only move during the times authorized by the permit and any route-specific restrictions.
• For moves using Texas state routes, permitted movement is controlled by permit conditions and approved routing, with daylight travel commonly used for many oversize loads when required.
• Weekend, holiday, weather, construction, curfew, and escort-related restrictions may apply depending on dimensions, weight, route, and permit conditions.
• Oversize farm equipment transport may need to avoid the busiest travel periods on I-44, US-82, US-277, US-281, US-287, and TX-240 Loop corridors.
• Local road access, posted restrictions, bridge limitations, and delivery timing near Wichita Falls may affect final routing after the state permit is issued.

• "Oversize Load" signs must be used when required by the state permit for farm equipment hauling in Wichita Falls, TX
• Visible safety flags are important when moving wide machinery through intersections, ramps, and rural access roads around Wichita Falls
• Lighting visibility should be confirmed before transport begins, particularly on high-volume routes such as I-44, US-82, US-277, and US-287
• Equipment must be secured to meet federal cargo securement requirements and any additional conditions listed on the oversize permit
• Local access restrictions can affect how oversize farm equipment is marked, flagged, and routed through Wichita Falls

• Farm equipment transport in Wichita Falls, TX may require advance review of I-44, US-82, US-277, US-281, US-287, and TX-240 Loop before the permit route is approved.
• North texas ranch roads, wheat and hay corridors, and red river freight routes can affect whether pilot cars, staging areas, alternate approaches, or additional route review are needed.
• Wind, rural road width, bridge access, and staging around large equipment should be reviewed close to pickup because detours, construction activity, weather, and local access conditions can change on short notice.
• City, county, and state routing requirements may apply when moving oversized agricultural equipment through Wichita County and the surrounding freight corridors.