San Angelo, TX
Farm Equipment Transport

In San Angelo, TX, a load is generally considered oversized or overweight if it exceeds the legal limits for Texas:

• Width: 8'6"
• Height: 14'
• Length: 45 feet single vehicle / 59 feet semitrailer / 65 feet truck-tractor combination
• Weight: 80,000 lbs gross vehicle weight

Any farm equipment load exceeding these limits may require an oversize or overweight permit in Texas. State, local, bridge, axle, and route-specific restrictions may apply. Contact us for route-specific requirements.

• Permits are required for farm equipment transport exceeding legal size or weight limits in Texas
• Permit duration and routing depend on permit type, load dimensions, weight, and issuing agency approval
• Route-specific approval may be required for loads moving through San Angelo's farm, dealer, rural access, and equipment shipping corridors
• Travel restrictions may apply during peak traffic, construction, weather events, or route limitations on the US-87, US-67, US-277, Loop 306 corridors
• Local San Angelo city and applicable Tom Green County approvals may be required in addition to Texas state permits when using city or county roads

Escort vehicles may be required for farm equipment transport in San Angelo, TX depending on width, height, length, overhang, route, and permit conditions:

• Escort vehicles may be required when farm equipment transport exceeds Texas legal size, weight, or permit routing limits
• Overwidth, overheight, overlength, and rear-overhang conditions are reviewed during the oversize/overweight permit process
• One or more pilot cars may be assigned based on the approved route, roadway type, traffic conditions, bridges, and work zones
• Height-pole escorts, police escorts, or utility coordination may be required for high loads or complex urban routes
• Local city, county, or bridge authority requirements may apply in addition to state permit conditions

• Oversize farm equipment transport in San Angelo, TX can only move during the times authorized by the permit and any route-specific restrictions.
• For moves using Texas state routes, permitted movement is controlled by permit conditions and approved routing, with daylight travel commonly used for many oversize loads.
• Weekend, holiday, urban-area, and seasonal route restrictions may apply depending on dimensions and routing.
• Oversize farm equipment transport may need to avoid the busiest travel periods on US-87, US-67, US-277.
• Local road access, posted restrictions, and delivery timing in Tom Green County may affect final routing after the state permit is issued.

• "Oversize Load" signs must be used when required by the state permit for farm equipment hauling in San Angelo, TX
• Visible safety flags are important when moving wide machinery through intersections, ramps, and rural access roads around San Angelo
• Lighting visibility should be confirmed before transport begins, particularly on high-volume routes such as US-87, US-67, US-277
• Equipment must be secured to meet federal cargo securement requirements and any additional conditions listed on the oversize permit
• Local access restrictions can affect how oversize farm equipment is marked, flagged, and routed through San Angelo

• Farm equipment transport in San Angelo, TX may require advance review of overpasses, ramps, turning areas, and local roads before the permit route is approved.
• Local road width, driveway access, and loading space can affect whether pilot cars, staging areas, or alternate routes are needed.
• Detours and posted restrictions should be reviewed close to pickup because road conditions can affect truck access on short notice.
• City, county, and state routing requirements may apply when moving farm equipment through Tom Green County corridors such as US-87, US-67, US-277.