Mission, TX
Farm Equipment Transport

In Mission, TX, a load is considered oversized if it exceeds:

• Width: 8'6"
• Height: 14'
• Length: 45 feet single vehicle / 59 feet semitrailer / 65 feet truck-tractor combination
• Weight: 80,000 lbs gross vehicle weight

Any load exceeding these limits requires an oversize or overweight permit.

• Permits are required for farm equipment transport exceeding legal size or weight limits in Texas
• Permit duration and routing depend on permit type, load dimensions, weight, and issuing agency approval
• Route-specific approval may be required for loads moving through Mission's farm, dealer, rural access, and equipment shipping corridors
• Travel restrictions may apply during peak traffic, weather events, or route limitations on the I-2 / US-83, US-83 Business, FM 495, SH-107, and FM 1016 corridors
• Local Mission city and applicable Hidalgo County approvals may be required in addition to Texas state permits when using city or county roads

Escort vehicles may be required based on load dimensions:

• Escort vehicles may be required when farm equipment transport exceeds Texas legal size, weight, or permit routing limits
• Overwidth, overheight, overlength, and rear-overhang conditions are reviewed during the oversize/overweight permit process
• One or more pilot cars may be assigned based on the approved route, roadway type, traffic conditions, bridges, and work zones
• Height-pole escorts, police escorts, or utility coordination may be required for high loads or complex routes through Rio Grande Valley corridors
• Local city, county, or bridge authority requirements may apply in addition to state permit conditions

• Oversize farm equipment transport in Mission, TX can only move during the times authorized by the permit and any route-specific restrictions.
• For moves using Texas state routes, permitted movement is controlled by permit conditions and approved routing, with daylight travel commonly used for many oversize loads.
• Weekend, holiday, urban-area, and seasonal route restrictions may apply depending on dimensions and routing.
• Oversize farm equipment transport may need to avoid the busiest travel periods on I-2 / US-83, US-83 Business, FM 495, and SH-107.
• Local road access, posted restrictions, and delivery timing in Hidalgo County may affect final routing after the state permit is issued.

• "Oversize Load" signs must be used when required by the state permit for farm equipment hauling in Mission, TX
• Visible safety flags are important when moving wide machinery through intersections, farm roads, and local access points around Mission
• Lighting visibility should be confirmed before transport begins, especially on Rio Grande Valley routes such as I-2 / US-83, SH-107, and FM 495
• Equipment must be secured to meet federal cargo securement requirements and any additional conditions listed on the oversize permit
• Local access restrictions can affect how oversize farm equipment is marked, flagged, and routed through Mission and Hidalgo County

• Farm equipment transport in Mission, TX may require advance review of rural access roads, field entrances, and turning space before the carrier arrives.
• Rio Grande Valley routes can be affected by agricultural traffic, commercial freight, and delivery points outside the city center.
• Oversize loads may need alternate routing when local roads, bridges, or narrow access points cannot safely support the equipment move.
• City, county, and state routing requirements may apply when moving farm equipment through Hidalgo County corridors such as I-2 / US-83, SH-107, and FM 495.