Bryan, TX
Farm Equipment Transport

Texas generally permits commercial loads up to 8 feet 6 inches wide, 14 feet high, a 59-foot semitrailer on many routes, and 80,000 pounds gross vehicle weight, subject to axle spacing and bridge-formula requirements. Route-specific length restrictions may apply, and equipment exceeding any legal limit may require a Texas oversize or overweight permit.

Farm equipment exceeding Texas legal size or weight limits must have the appropriate TxDMV oversize or overweight permit and authorized route when applicable. Exact loaded dimensions, axle spacing, axle weights, gross weight, origin, and destination are required before the correct permit can be issued. Separate permits or coordination may be needed for Bryan streets, Brazos County roads, or other locally maintained routes.

Texas permit conditions may require one or more pilot cars depending on the agricultural equipment’s width, height, length, route, and roadway type. A height-pole escort may be required for taller loads, while especially large machinery may need additional traffic control or law-enforcement coordination. Bryan and Brazos County roads may have separate escort conditions from the state highway system.

Texas oversize permits may limit agricultural equipment transport to daylight hours or establish specific operating windows based on the load dimensions and route. Holiday restrictions, weather conditions, and peak traffic periods may also affect movement. Bryan or Brazos County may require additional scheduling for oversized loads traveling on locally maintained roads.

Equipment transported around Bryan should be loaded on a trailer selected for the machine’s weight, ground clearance, and dimensions. Heavy-duty chains, binders, blocking, warning signs, flags, amber lights, and escort equipment may be required based on Texas permit conditions. Farm gates, livestock areas, and loading surfaces should be checked before the carrier enters the property.

Routes through Bryan may use State Highway 6, State Highway 21, State Highway 47, or Farm to Market Road 2818 before reaching farms and ranches throughout Brazos County. Planning should account for livestock gates, narrow farm roads, bridge limits, low branches, and loading areas that may be difficult to access after heavy rain.