Redwood City, CA
Farm Equipment Transport

In Redwood City, CA, a load is considered oversized if it exceeds:

• Width: 8'6"
• Height: 14'
• Length: 75 feet overall on designated highways / 65 feet on non-designated highways
• Weight: 80,000 lbs gross vehicle weight

Any load exceeding these limits requires an oversize or overweight permit.

• Permits are required for farm equipment transport exceeding legal size or weight limits in California
• Permit duration and routing depend on permit type, load dimensions, weight, and issuing agency approval
• Route-specific approval may be required for loads moving through Redwood City's Bay Area, dealer, rural access, and equipment shipping corridors
• Travel restrictions may apply during peak traffic, weather events, or route limitations on the US-101, I-280, SR-84, SR-82, and Veterans Boulevard corridors
• Local Redwood City and applicable San Mateo County approvals may be required in addition to California state permits when using city or county roads

Escort vehicles may be required based on load dimensions:

• Escort vehicles may be required when farm equipment transport exceeds California legal size, weight, or permit routing limits
• Overwidth, overheight, overlength, and rear-overhang conditions are reviewed during the oversize/overweight permit process
• One or more pilot cars may be assigned based on the approved route, roadway type, traffic conditions, bridges, and work zones
• Height-pole escorts, police escorts, or utility coordination may be required for high loads or complex Bay Area access routes
• Local city, county, or bridge authority requirements may apply in addition to state permit conditions

• Oversize farm equipment transport in Redwood City, CA can only move during the times authorized by the permit and any route-specific restrictions.
• For moves using California state routes, permitted movement is controlled by permit conditions and approved routing, with daylight travel commonly used for many oversize loads.
• Weekend, holiday, urban-area, and seasonal route restrictions may apply depending on dimensions and routing.
• Oversize farm equipment transport may need to avoid the busiest travel periods on US-101, I-280, SR-84, SR-82, and nearby Bay Area access routes.
• Local road access, posted restrictions, and delivery timing in San Mateo County may affect final routing after the state permit is issued.

• "Oversize Load" signs must be used when required by the state permit for farm equipment hauling in Redwood City, CA
• Visible safety flags are important when moving wide machinery through Bay Area intersections, ramps, industrial access points, and tighter local roads
• Lighting visibility should be confirmed before transport begins, especially on routes such as US-101, I-280, SR-84, and SR-82
• Equipment must be secured to meet federal cargo securement requirements and any additional conditions listed on the oversize permit
• Local access restrictions can affect how oversize farm equipment is marked, flagged, and routed through Redwood City and San Mateo County

• Farm machinery shipping in Redwood City, CA may require careful review of Bay Area traffic, tight streets, bridge access, and pickup restrictions before the route is approved.
• Industrial pickup points, storage yards, and Peninsula delivery locations may need staging plans for larger trailers.
• Oversize equipment may need alternate routing to avoid restricted local roads, sharp turns, and congested access points near US-101 and SR-84.
• City, county, and state routing requirements may apply when moving farm equipment through San Mateo County and nearby Bay Area corridors.